LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2004 >> H2 4D Utility Pickup >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Data Link Communication System >> Repair Instructions >> Data Link Connector Replacement >> Installation Procedure

Installation Procedure

  1. Place the data link connector into position.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
    2. Fig 1: Data Link Connector
    GM386625Courtesy of GENERAL MOTORS CORP.
  2. Install the bolts/screws to the data link connector.

    Tighten:  Tighten the bolts/screws to 2 N.m (18 lb in).

scientia non olet · About LEMON Manuals