LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 578 (Supplemental Inflatable Restraint System) >> Repair Instructions >> Inflatable Restraint Instrument Panel (I/P) Module Disable Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Hummer H2. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the I/P module switch electrical connector.
    2. Fig 1: Inflatable Restraint Instrument Panel (I/P) Module Disable Switch
    GM412186Courtesy of GENERAL MOTORS CORP.
  2. Install the I/P module switch into the lower right opening of the switch plate panel.
  3. Install the instrument panel trim bezel. Refer to Trim Panel Replacement - Instrument Panel (I/P) Cluster in Instrument Panel, Gauges and Console.
scientia non olet · About LEMON Manuals