LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2003 >> H2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 358 (Entertainment System) >> Repair Instructions >> Antenna Extension Cable Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the radio. Refer to RADIO REPLACEMENT (W/O UM8)  or RADIO REPLACEMENT (W UM8)  .
  2. Remove the right side windshield garnish molding. Refer to GARNISH MOLDING REPLACEMENT - WINDSHIELD PILL in Interior Trim.
  3. Remove the upper instrument panel trim pad. Refer to TRIM PAD REPLACEMENT - INSTRUMENT PANEL (I/P) in Instrument Panel, Gages and Console.
  4. Disconnect the antenna coaxial cable from the radio cavity by sliding the cable connection upwards out of the retainer.
  5. Remove the remaining cable clips (1) from the instrument panel support.
  6. Disconnect the coaxial cable connector (2).
  7. Remove the antenna extension cable from the vehicle.
    Fig 1: Removing Antenna Extension Cable
    G01507140Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals