LEMON Manuals
: Even more car manuals for everyone
Home
>>
Hummer
>>
2003
>>
H2
>>
Repair and Diagnosis
>>
External Pages
>>
Different car
>>
Section 165 (Supplemental Inflatable Restraint System)
>>
Diagnostics
>>
Connector Identification
Connector Identification
WARNING:
This page is about a different car, the 2003 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Refer to illustrations to identify SIR connector terminals. See
Fig 1
,
Fig 2
,
Fig 3
,
Fig 4
,
Fig 5
&
Fig 6
.
Fig 1: Identifying SDM Connector Terminals
Courtesy of GENERAL MOTORS CORP.
Fig 2: Identifying Driver-side Air Bag Module Connector Terminals
Courtesy of GENERAL MOTORS CORP.
Fig 3: Identifying Passenger-side Air Bag Module Connector Terminals
Courtesy of GENERAL MOTORS CORP.
Fig 4: Identifying Side Impact Air Bag Module Connector Terminals
Courtesy of GENERAL MOTORS CORP.
Fig 5: Identifying Side Impact Sensor (SIS) Connector Terminals
Courtesy of GENERAL MOTORS CORP.
Fig 6: Identifying Front End Discriminating Sensor Connector Terminals
Courtesy of GENERAL MOTORS CORP.