LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2007 >> Fit Base, Automatic >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Keyless/Power Door Locks/Security System >> Hood Switch Test

Hood Switch Test

  1. Open the hood.
  2. Disconnect the 2P connector (A) from the hood switch (B).
    Fig 1: Identifying Hood Switch 2P Connector Terminals
    G05456601Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Check for continuity between the terminals.
    • There should be continuity between the No. 1 and No. 2 terminals when the hood is opened (latch released).
    • There should be no continuity between the No. 1 and No. 2 terminals when the hood is closed (latch pushed down).
  4. If the continuity is not as specified, replace the hood latch assembly (see HOOD LATCH REPLACEMENT ).
scientia non olet · About LEMON Manuals