LEMON Manuals
: Even more car manuals for everyone
Home
>>
Genesis
>>
2019
>>
G70 2.0T Dynamic, AWD
>>
Repair and Diagnosis
>>
External Pages
>>
Different variant/trim
>>
Section 7 (Engine Control System - 3.3L)
>>
Engine Control Module (ECM)
>>
Repair Procedures
>>
Removal
Repair Procedures: Removal
WARNING:
This page is about a different variant/trim than selected.
Switch "OFF" the ignition and disconnect the negative (-) battery terminal.
Disconnect the ECM connector (A).
Courtesy of HYUNDAI MOTOR AMERICA
Remove the ECM bracket assembly (C) after loosening the mounting bolt (A) and nuts (B).
Courtesy of HYUNDAI MOTOR AMERICA
Remove the ECM (B) after loosening the mounting nuts (A).
Courtesy of HYUNDAI MOTOR AMERICA