LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2017 >> G80 5.0 Ultimate >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 16 (Engine Control System - 3.8L) >> Injector Drive Box >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Remove the ECM & TCM & IDB bracket.

    (Refer to Engine Control System - "ECM ")

  3. Disconnect the TCM (B) from the bracket after loosening mounting bolt (A).
    G11354989Courtesy of
  4. Disconnect the IDB (B) from the bracket after loosening mounting bolt (A).
G11354990Courtesy of
G11354991Courtesy of