LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2021 >> Acadia SL >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 2.5L (LCV) - Repair Instructions >> Repair Instructions >> Engine Oil Pressure Sensor Replacement >> Installation Procedure

Installation Procedure

  1. Engine Oil Pressure Sensor (1) - Install and tighten 35 N.m (26 lb ft)
    GM4375489Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Component Fastener Tightening Caution .

  2. Battery Cable (2) - Reposition
    GM4375606Courtesy of GENERAL MOTORS COMPANY
    3. CAUTION:

    Refer to Fastener Caution .

  3. Battery Negative Cable Ground Stud (1) - Install and tighten 40 N.m (30 lb ft)
  4. Electrical Connector (1) - Connect
    GM4375295Courtesy of GENERAL MOTORS COMPANY
  5. Install the right front tire and wheel assembly. Tire and Wheel Removal and Installation
  6. Lower the vehicle.
scientia non olet · About LEMON Manuals