Fastener Specifications
WARNING: This page is about a different car, the 2018 GMC Terrain and 2018 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Brake Caliper Piston Dust Boot |
| Brake Caliper Piston Seal |
| Brake Hose Fitting Gasket |
| Rear Parking Brake Actuator Lever Seal |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Brake Caliper Guide Pin Bolt - Front and Rear | 40 N.m (30 lb ft) |
| Brake Hose Fitting Bolt - Front and Rear | 40 N.m (30 lb ft) |
| Front Brake Caliper Bracket Bolt | |
|
150 N.m (111 lb ft) |
|
15-30 Degrees |
| Front Brake Rotor Bolt | 9 N.m (80 lb in) |
| Parking Brake Actuator Bolt | 12 N.m (106 lb in) |
| Rear Brake Caliper Bracket Bolt | |
|
100 N.m (74 lb ft) |
|
15-30 Degrees |
| Rear Brake Rotor Bolt | 9 N.m (80 lb in) |