Remote Keyless Entry
- Check that ground G200 is clean and tight.
- Check the GAUGES fuse by observing the instrument cluster gages.
- Check CIG LTR fuse by operating the cigarette lighter.
- Check condition of PWR ACC circuit breaker for an open condition. If breaker is open, locate and repair source of overload.
- Always check terminal contact before replacing any component.
- If a second transmitter is available, try it. If it works, change the batteries in the first transmitter and try again. If it still does not work, it is defective.
- Check Portable Transmitter battery terminals. They should be clean and make good contacts with the battery.
- If in doubt as to the condition of the transmitter batteries, replace them with new ones. Check battery voltage with a DVOM may give results. Check for a broken (or partially broken) wire inside of the insulation which could cause system failure but prove "GOOD" in continuity/voltage check.