LEMON Manuals: Even more car manuals for everyone
Home >> Freightliner >> 2007 >> Sprinter 2500 V6-3.0L DSL Turbo >> Repair and Diagnosis >> Body and Frame >> Frame >> Cross-Member >> Rear Cross-Member >> Service and Repair >> Installation

Installation






INSTALLATION




1. Install the transmission crossmember (5) and install the bolts (3, 4)
2. Tighten the crossmember bolts (3) to 58 Nm (43 ft. lbs.).
3. Remove the transmission support.
4. Install the bolt (4) and tighten to;
- M8 = 30 Nm (22 ft. lbs.).
- M10 = 58 Nm (43 ft. lbs.).
scientia non olet · About LEMON Manuals