LEMON Manuals
: Even more car manuals for everyone
Home
>>
Ford
>>
2013
>>
Fusion S
>>
Repair and Diagnosis
>>
Electrical
>>
Starter
>>
Starting System - 2.5L
Starting System - 2.5L
Expand All (for easy ctrl-f)
Collapse All
Specifications
Description and Operation
Starting System - Overview
Starting System
Starting System - with Remote Start
Starting System - System Operation and Component Description
System Operation
System Diagram
Network Message Chart
Starting System
Component Description
Integrated Keyhead Transmitter (IKT)
Passive Anti-Theft Transceiver
Ignition Switch
Powertrain Control Module (PCM)
Diagnosis and Testing
Starting System
Inspection and Verification
DTC Charts
Symptom Chart(s)
Symptom Chart: Starting System
Pinpoint Test(s)
PINPOINT TEST A: Engine Does Not Crank
Notes
Normal Operation and Fault Conditions
Possible Sources
Visual Inspection and Diagnostic Pre-checks
Engine Does Not Crank
PINPOINT TEST B: Unusual Starter Noise
Normal Operation and Fault Conditions
Possible Sources
Visual Inspection and Diagnostic Pre-checks
Unusual Starter Noise
PINPOINT TEST C: P0616 or P0617
Notes
Normal Operation and Fault Conditions
Possible Sources
Visual Inspection and Diagnostic Pre-checks
P0616 Or P0617
PINPOINT TEST D: C113A:11 or C113A:15
Notes
Normal Operation and Fault Conditions
Possible Sources
C113A:11 Or C113A:15
Component Test(s)
Starter Motor - Positive Circuit Test
Starter Motor - Ground Circuit Test
General Procedures
Starter Motor Drive Gear and Flywheel Ring Gear Inspection
Activation
Removal and Installation
Starter Motor
Removal
Installation