LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Explorer Police Interceptor, FWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System - General Information >> General Procedures >> Connecting Rod Bend >> General Procedure

General Procedure

NOTE: Refer to General Specifications in the appropriate engine service information for the specification.
  1. Using the Feeler Gauge Set, measure the connecting rod bend on a suitable alignment fixture. Follow the instructions of the fixture manufacturer. Verify the bend measurement is within specification.
    G06073223
scientia non olet · About LEMON Manuals