LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2007 >> Crown Victoria V8-4.6L VIN W >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Camshaft Position Sensor >> Service and Repair

Camshaft Position Sensor: Service and Repair

CAMSHAFT POSITION (CMP) SENSOR







Removal and Installation
1. Disconnect the battery ground cable.
2. Disconnect the camshaft position (CMP) sensor electrical connector.
3. Remove the CMP bolt.
- To install, tighten to 10 Nm (89 lb-in).

4. Remove the CMP sensor.
5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals