LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2005 >> Ranger 2WD V6-3.0L VIN U >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Coolant Temperature Sensor/Switch (For Computer) >> Service and Repair >> Removal and Installation

Removal and Installation

ENGINE COOLANT TEMPERATURE (ECT) SENSOR

Removal and Installation
1. Disconnect the battery ground cable.
2. Partially drain the cooling system.







3. Disconnect the engine coolant temperature (ECT) sensor electrical connector.







4. Remove the ECT sensor.
5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals