LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Mustang V6-3.8L VIN 4 >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Coolant Temperature Sensor/Switch (For Computer) >> Service and Repair >> Engine Coolant Temperature (ECT) Sensor - Mach I

Engine Coolant Temperature (ECT) Sensor - Mach I

REMOVAL
1. Remove the air intake scoop.
2. Partially drain the engine cooling system.







3. Disconnect the Engine Coolant Temperature (ECT) sensor electrical connector.







4. Remove the ECT sensor.

INSTALLATION
1. To install, reverse the removal procedure.
^ Apply sealant to the ECT sensor threads.
scientia non olet · About LEMON Manuals