Housing Assembly HVAC: Service and Repair

REMOVAL
1. Remove the instrument panel. Refer to: Body and Frame, Interior Trim, Dashboard/Instrument Panel, Service and Repair, Removal and Installation, Removal and Installation

2. Drain the cooling system.







3. Disconnect the heater water hoses from the heater core.







4. Disconnect the vacuum harness connector.







5. Remove the lower retaining nuts.







6. Remove the upper retaining nuts and remove the plenum chamber.

INSTALLATION
1. To install, reverse the removal procedure.
^ Lubricate the coolant hoses with coolant hose lubricant or plain water only if needed.