LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Excursion 2WD V10-6.8L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Service and Repair >> Engine System - General Information >> Connecting Rod >> Connecting Rod Bend

Connecting Rod Bend

Connecting Rod - Bend





1. Measure the connecting rod bend on a suitable alignment fixture. Follow the instructions of the fixture manufacturer. Verify the bend measurement is within specification.
^
^ If out of specification, install new components as necessary.
scientia non olet · About LEMON Manuals