LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Mustang V6-3.8L VIN 4 >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Camshaft Position Sensor >> Service and Repair >> Camshaft Position (CMP) Sensor

Camshaft Position (CMP) Sensor

REMOVAL
1. Disconnect the battery ground cable. For additional information, refer to Battery.







2. Remove the Camshaft Position (CMP) sensor:
- Disconnect the connector.
- Remove the bolts and the sensor.

INSTALLATION
1. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals