LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Focus L4-2.0L DOHC VIN 3 >> Repair and Diagnosis >> Specifications >> Mechanical Specifications >> Engine >> System Specifications >> Torque >> Connecting Rod Bolt/Nut

Connecting Rod Bolt/Nut





NOTE: The crankshaft must turn freely, if necessary check and adjust the bearing clearances.

Tighten the connecting rod bearing bolts in two stages.
- Stage 1: 35 Nm
- Stage 2: 90 degrees
scientia non olet · About LEMON Manuals