Module Configuration

NOTE:
^ If using the WDS, select Module Configuration and Programming, then follow the screen prompts.
^ Make sure module is listed as supporting anti-theft configure and supports the specific item to be configured in the Module Configuration Index.

1. Select Service Bay Functions on the scan tool.
2. Select the RAP module.
3. Select Anti-Theft Configure on the scan tool.
4. Select the item to be configured.
^ HORN CHIRP
^ PERSONALITY
^ AUTOLOCK/RELOCK
^ LED FLASH WHEN ARMED

5. Select the item to be enabled or disabled.
6. Enable or disable the item as necessary to reflect the customer preference.