Transmitter

1. Cycle the ignition from OFF to RUN four times within three seconds. The locks will then lock and unlock, confirming program mode has been entered.

NOTE: Keyless entry remote transmitters can also be programmed using a scan tool and the Ford Service Function (FSF) card.

2. Press any button on the transmitter to be programmed.

NOTE: When the first keyless entry remote transmitter is programmed, all other keyless entry remote transmitters are erased.

3. If additional keyless entry remote transmitters are to be programmed, repeat Step 2 within 7.5 seconds.
4. To exit program mode, turn the ignition to START or wait 7.5 seconds.