LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1998 >> Ranger EV >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> System Testing >> Test A: Flash Code 1 - No Dynamic Pull At Speed Control Servo/Actuator >> Check Speed Control Servo/Actuator Cable

Check Speed Control Servo/Actuator Cable

Turn ignition off. Disconnect speed control servo/actuator cable from servo/actuator. Check speed control servo/actuator cable for sticking or binding. If speed control servo/actuator cable is okay, replace speed control servo/actuator and perform SELF-DIAGNOSTIC TEST under SELF-DIAGNOSTIC SYSTEM. If speed control servo/actuator cable is not okay, replace speed control servo/actuator cable and perform self-test diagnostics using NGS tester.

scientia non olet · About LEMON Manuals