Camshaft Position Sensor - Removal

REMOVAL





1. Disconnect and isolate the negative battery cable.
2. Remove the engine cover (1).





3. Remove the air cleaner body (6) Air Cleaner Body - Removal.





4. Disconnect the PCV hose (1) from the intake manifold.
5. Disconnect the vent hose (3) from the oil filler neck.
6. Remove three bolts (2) and remove the oil separator housing (4) from the cylinder head cover.





7. Unlock and disconnect the camshaft position (CMP) sensor electrical connector (1).





8. Remove the mounting bolt (2) and camshaft position (CMP) sensor (1).





9. The camshaft position (CMP) sensor O-ring (1) can be reused if not damaged.