Intake Manifold

Upper Intake Manifold





The bolts must tightened in the sequence shown 7 Nm (62 in. lbs.)





Install the seven upper intake manifold attaching bolts
Tighten the bolts 8 Nm (71 in. lbs.)

Install two nuts to the upper intake manifold support bracket

Tighten the nuts 10 Nm (89 in. lbs.)

Tighten the stud 20 Nm (15 ft. lbs.)







LOWER INTAKE MANIFOLD






Tighten the four bolts in the sequence shown 7 Nm (62 in. lbs.)







Install the intake manifold retaining bolts and tighten 8 Nm (71 in. lbs.)