LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2012 >> 300 AWD V8-5.7L >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Condenser >> Service and Repair >> Ignition Capacitor - Removal

Ignition Capacitor - Removal






5.7L / 6.4L





The ignition capacitor (2) is attached at the left rear corner of the intake manifold (3).

1. Disconnect and isolate the negative battery cable.
2. Remove the electrical connector (1).
3. Remove the retaining bolt and remove capacitor (2).