LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2010 >> Sebring Convertible V6-2.7L >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Condenser >> Service and Repair >> Ignition Capacitor - Removal >> 2nd

2nd






2.7L 2nd





The ignition capacitor is located under the intake manifold on the drivers side of the engine.

1. Disconnect and isolate negative battery cable at battery.
2. Remove electrical connector (3).
3. Remove mounting bolt (1) and ignition capacitor (2).