LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2008 >> Crossfire V6-3.2L >> Repair and Diagnosis >> Wiper and Washer Systems >> Washer Fluid Level Switch >> Service and Repair >> Installation

Installation







INSTALLATION





1. Insert the washer fluid level switch (2) into the rubber grommet (3) at the rear of the washer reservoir (1).
2. Press the washer fluid level switch inward until fully seated.
3. Install the washer reservoir. Washer Reservoir - Installation.
scientia non olet · About LEMON Manuals