LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2008 >> Crossfire V6-3.2L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Crankshaft Position Sensor >> Description and Operation >> Crankshaft Position Sensor - Installation

Crankshaft Position Sensor - Installation







INSTALLATION





1. Install the crankshaft position sensor (1) to the engine. Tighten to 8 Nm (71 in. lbs.).
2. Connect the crankshaft position sensor harness connector.
3. Install the air cleaner housing. Air Cleaner Housing - Installation.
4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals