A/C Compressor - Installation

INSTALLATION





1. Connect the A/C harness connector to the compressor.
2. Install the bolts on the high side and the low side pressure lines. Tighten to 23 Nm (17 ft. lbs.).
3. Install the A/C compressor then install the three bolts (1). Tighten to 23 Nm (17 ft. lbs.).
4. Install the lower engine compartment panel.
5. Install the accessory drive belt. Accessory Drive Belt - Installation.
6. Connect the negative battery cable.
7. Charge the refrigerant to the system. Refrigerant System Charge.