LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2008 >> Crossfire V6-3.2L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Engine Lubrication >> Oil Level Sensor >> Service and Repair >> Removal

Removal







REMOVAL

1. Remove the lower oil pan. Engine Oil Pan - Removal.




2. Disconnect the oil level/temperature sensor harness connector (1).




3. Remove the two oil level/temperature sensor screws (1).
4. Remove the two harness retainer screws (2) and the oil level/temperature sensor.
scientia non olet · About LEMON Manuals