LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> Sebring GTC >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine & Automatic Transmission Cooling System >> Engine >> Radiator >> Installation

Engine & Automatic Transmission Cooling System: Engine: Radiator: Installation

  1. Slide radiator into position and seat the radiator assembly lower rubber isolators in the mount holes.
  2. Attach air conditioning condenser to radiator. Tighten mounting screws to 5 N.m (45 in. lbs.).
  3. Install transmission oil cooler tube support bracket and attaching screw to left side of radiator. Tighten mounting screw to 5 N.m (45 in. lbs.).
  4. Connect hoses to radiator.
  5. Install radiator fan.
  6. Connect radiator fan electrical connector.
  7. Install upper radiator crossmember.
  8. Connect negative cable to auxiliary jumper terminal.
  9. Fill cooling system ((Refer to COOLING - STANDARD PROCEDURE) ).
scientia non olet · About LEMON Manuals