LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> Sebring GTC >> Repair and Diagnosis >> External Pages >> Different car >> Section 106 (Interior/Exterior) >> DECKLID/Liftgate >> Lock Cylinder >> Installation

Lock Cylinder: Installation

WARNING: This page is about a different car, the 2006 Dodge Viper. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position lock cylinder and seal through opening in decklid.
  2. Install nut attaching lock cylinder to the decklid and tighten to 12 N.m (9 ft. lbs.).
  3. Align lock cylinder arm to slot in latch remote and insert arm into slot.
  4. Install the three lock cylinder cable bracket screws.
scientia non olet · About LEMON Manuals