LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2000 >> Intrepid Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (2.7L V6 Engine) >> Structural Collar/Cover >> Installation

Structural Collar/Cover: Installation

WARNING: This page is about a different car, the 2002 Dodge Intrepid, 2002 Chrysler Intrepid, and 2002 Chrysler Concorde. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: The collar must be tighten using this service procedure, as damage to collar and/or oil pan may occur.
  1. Install structural collar (Figure) using the following tightening sequence:
    1. Install the vertical collar to oil pan bolts. Torque bolts initially to 1.1 N.m (10 in. lbs.).
    2. Install the horizontal collar to transmission bolts and torque to 55 N.m (40 ft. lbs.).
    3. Starting with the center vertical bolts and working outward, final torque bolts to 55 N.m (40 ft. lbs.).
  2. Lower vehicle.
scientia non olet · About LEMON Manuals