All Doors Will Not Lock Using Transmitter
WARNING: This page is about a different car, the 1998 Plymouth Breeze, 1998 Dodge Stratus, and 1998 Chrysler Cirrus. However, it is still accessible from the selected car via links, so may be relevant.
Using voltmeter, backprobe BCM 20-pin connector. Check for a voltage pulse at terminals No. 10, 11, 12 and 13 while pressing transmitter LOCK button. See Figure . If there is no voltage pulse, replace BCM. See REMOVAL & INSTALLATION . If voltage pulse is present, repair harness between appropriate BCM terminal and door lock motor. See WIRING DIAGRAMS .