LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2024 >> Trax ACTIV >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 1.2L (LIH) - Repair Instructions >> Repair Instructions >> Engine Control Module Bracket Replacement >> Installation Procedure

Installation Procedure

  1. GM6160467Courtesy of GENERAL MOTORS COMPANY

    Engine Control Module Bracket (3) - Install

  2. Engine Coolant Air Bleed Hose Clip (2) - Install
    3. CAUTION:

    Refer to Fastener Caution .

  3. Engine Control Module Bracket Bolt (1) - Install and tighten [3x] - Fastener Specifications
  4. GM5390616Courtesy of GENERAL MOTORS COMPANY

    Engine Control Module (1) - Install

  5. GM6160464Courtesy of GENERAL MOTORS COMPANY

    Retainer (2) - Install

  6. Connect the electrical connectors. (1)
  7. Use the scan tool to reset the engine oil life remaining back to the original percentage recorded.
  8. If replacing the engine control module, it is necessary to reprogram the replacement module. Control Module References
scientia non olet · About LEMON Manuals