Knock Sensor Replacement
NOTE:
Callouts items in the following chart represent components shown in graphic above.
| Callout | Component Name |
|---|---|
| Preliminary Procedure Remove the intake manifold. Refer to Intake Manifold Replacement . |
|
| 1 | Knock Sensor Fasteners (Qty: 2)
CAUTION:
Refer to Fastener Caution . Tighten 25N.m(18 lb ft) |
| 2 | Knock Sensors (Qty: 2) Procedure Disconnect the electrical wiring harness connectors from the knock sensors. |