Fastener Specifications
WARNING: This page is about a different car, the 2017 GMC Canyon and 2017 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Lube Baffle |
| Pinion Gear Shaft Lock Roll Pin |
| Pinion Spacer |
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Ring Gear Bolts | 180 N.m (133 lb ft) |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Actuator, Electric | 20 N.m (15 lb ft) |
| Differential Carrier Assembly Bearing Cap Bolts | 40 N.m (30 lb ft) |
| Differential Carrier Assembly Mounting Bracket to Carrier Bolts | 160 N.m (118 lb ft) |
| Differential Carrier Assembly Mounting Bracket to Frame Bolts | 160 N.m (118 lb ft) |
| Differential Housing Cover Bolts | 20 N.m (15 lb ft) |
| Disconnect Fork Access Cover Bolts | 20 N.m (15 lb ft) |
| Plug, Drain and Fill | 32 N.m (24 lb ft) |
| Front Axle Shaft Tube to Axle Bolts | 60 N.m (44 lb ft) |