Fastener Specifications
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Brake Hose Fitting Gasket |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Brake Caliper Bleeder Valve - Front and Rear | 13 N.m (115 lb in) |
| Brake Caliper Bracket Bolt - Front and Rear | 175 N.m (129 lb ft) |
| Brake Caliper Guide Pin Bolt* - Front | 64 N.m (47 lb ft) |
| Brake Caliper Guide Pin Bolt* - Rear | 27 N.m (20 lb ft) |
| Brake Hose Fitting Bolt - Front | 40 N.m (30 lb ft) |
| Brake Hose Fitting Bolt - Rear | 50 N.m (37 lb ft) |
| Brake Rotor Bolt - Front and Rear | 12 N.m (106 lb in) |
| *Tighten the bolt closest to the bleeder valve first. | |