Fastener Specifications
WARNING: This page is about a different car, the 2017 GMC Canyon and 2017 Chevrolet Colorado. However, it is still accessible from the selected car via links, so may be relevant.
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Brake Pipe Fitting - Left Front, Left Rear, Right Front, Right Rear | 18 N.m (13 lb ft) |
| Brake Pressure Modulator Valve (BPMV) Bolt | 9 N.m (80 lb in) |
| Brake Pressure Modulator Valve (BPMV) Bracket Bolt | 25 N.m (18 lb ft) |
| Electronic Brake Control Module (EBCM) Bolt | 3 N.m (27 lb in) |
| Front Wheel Speed Sensor Bolt | 6 N.m (53 lb in) |
| Front Wheel Speed Sensor Bracket Bolt | 9 N.m (80 lb in) |
| Master Cylinder Primary Brake Pipe Fitting | 32 N.m (24 lb ft) |
| Master Cylinder Secondary Brake Pipe Fitting | 32 N.m (24 lb ft) |
| Rear Wheel Speed Sensor Bolt | 9 N.m (80 lb in) |
| Vehicle Stability Control System Switch Fastener | 2.5 N.m (22 lb in) |