LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2013 >> Trax LS, Standard Trans >> Repair and Diagnosis >> Electrical >> Starter >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Current Sensor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Battery Negative Cable And Current Sensor
    GM2027819Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Note the orientation of the battery current sensor.

  1. Install the current sensor (2) to the battery negative cable (1).
  2. Install the battery negative cable. Refer to Battery Negative Cable Replacement .
scientia non olet · About LEMON Manuals