Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment

Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment





1. Loosen the jam nut on the tie rod (2).

2. Rotate the inner tie rod (1) to the required toe specification setting. Refer to Wheel Alignment Specifications Specifications.

Caution:
Refer to Fastener Caution Fastener Caution.

3. Tighten the jam nut on the tie rod to 68 Nm (50 lb ft).

4. Check the toe setting after tightening.

5. Re-adjust the toe setting if necessary.