LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> Uplander Base, 3.9 M >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Front Wheel Speed Sensor Replacement >> Installation Procedure

Installation Procedure

  1. Install the hub and bearing assembly to the vehicle. Refer to Front Wheel Bearing and Hub Replacement .
  2. Lower the vehicle.
  3. Turn the ignition switch to the RUN position with the engine OFF.
  4. Perform diagnostic system check. Refer to Diagnostic System Check - Vehicle .
scientia non olet · About LEMON Manuals