LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2009 >> Uplander Base, 3.9 1 >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> Automatic Level Control >> Repair Instructions >> Automatic Level Control Relay Replacement >> Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
    2. Fig 1: Locating Mounting Screw For Automatic Level Control Relay
    GM878217Courtesy of GENERAL MOTORS CORP.
  2. Remove mounting screw (1) from the automatic level control relay.
    3. Fig 2: View Of Automatic Level Control Relay Electrical Connector
    GM878218Courtesy of GENERAL MOTORS CORP.
  3. Disconnect electrical connector (1) from the automatic level control relay (2).
scientia non olet · About LEMON Manuals