LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2008 >> Optra LS, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 2.0L (L34 GMDAT) - Introduction >> Repair Instructions >> Intake Air Temperature Sensor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Intake Air Temperature (IAT) Sensor And Connector
    GM1289424Courtesy of GENERAL MOTORS CORP.
  1. Install the IAT sensor into the air intake tube.
  2. Connect the IAT connector.
  3. Connect the negative battery cable.
scientia non olet · About LEMON Manuals