LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2008 >> Impala SS >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 5.3L - Introduction (2 Of 2) >> Repair Instructions >> Fuel Level Sensor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Fuel Level Sensor
    GM1575967Courtesy of GENERAL MOTORS CORP.
  1. Slide the fuel level sensor (1) onto the bucket and upward.
    2. Fig 2: Identifying Fuel Level Sensor Retainer
    GM1575966Courtesy of GENERAL MOTORS CORP.
  2. Slide the fuel level sensor upward until the retainer (1) locks.
    3. Fig 3: Identifying Fuel Level Sensor Electrical Connector
    GM1575965Courtesy of GENERAL MOTORS CORP.
  3. Connect the fuel level sensor electrical connector (1).
  4. Install the fuel sender assembly. Refer to Fuel Tank Fuel Pump Module Replacement .
scientia non olet · About LEMON Manuals