LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Uplander Base >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Cellular Communication Systems >> Repair Instructions >> OnStar Button Assembly Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Overhead Console Components
    GM1530702Courtesy of GENERAL MOTORS CORP.
  1. Install the OnStar® Microphone into the OnStar® button assembly. Refer to OnStar Microphone Replacement .
  2. Position the OnStar® button assembly (4) to the overhead console.
    3. Fig 2: View Of Overhead Console Mounting
    GM1530697Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the screws to secure the OnStar® button assembly to the overhead console.

    Tighten:  Tighten the nuts to 2 N.m (18 lb in).

  4. Connect the electrical connectors.
  5. Align the overhead console within the vehicle.
  6. Press up on the overhead console engaging the fasteners in order to secure the console to the vehicle.
  7. Install the overhead console screw.

    Tighten:  Tighten the screw to 2 N.m (18 lb in).

  8. Install the courtesy lamp lens.
scientia non olet · About LEMON Manuals