Key Identification and Usage

Fig 1: Identifying Key Cut Positions & Depths

Courtesy of GENERAL MOTORS CORP.

The keys are double sided and reversible. The master key and valet key contain transponders that are read by the theft deterrent system when the keys are used in the ignition. The keys have 10 cut positions (1) with five different depths (2).

The keys that may be furnished with the vehicle consist of the following:

• The master key, which contains a transponder (3). This key will operate all of the locks on the vehicle.
• The valet key, which contains a transponder (3). This key will operate the front door locks and the ignition lock only.
• The emergency key, which does not contain a transponder. This key will operate the door locks, rear compartment lock and the I/P storage compartment lock only. This key is intended for emergency use only.