LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2004 >> Tracker RWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 2.0L (Introduction) >> Repair Instructions >> Idle Air Control (IAC) Valve Replacement >> Removal Procedure

Removal Procedure

  1. Remove the electrical connector from the idle air control (IAC) valve.
  2. Remove both attaching bolts (3).
  3. Remove the IAC valve (2).
    4. Fig 1: View Of IAC Valve, O-Ring & Attaching Bolts
    GM419581Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals