Removal Procedure
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle
in General Information.
- Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation
in Tires and Wheels.
Courtesy of GENERAL MOTORS CORP.
- Remove the shock module yoke to lower control arm mounting nut.
Courtesy of GENERAL MOTORS CORP.
- Install J 24319-B
to the shock module yoke to lower control arm stud.
- Disconnect the shock module yoke from the lower control arm using J 24319-B
.
Courtesy of GENERAL MOTORS CORP.
- Remove the shock module yoke to shock absorber pinch bolt and nut.
Courtesy of GENERAL MOTORS CORP.
- Spread the shock module yoke at the pinch bolt using a flat-bladed tool.
- Remove the shock module yoke from the shock absorber.